Sony A1 Battery and Charger Guide

The Sony A1 packs an enormous amount of power into such a small body, but thanks to the official Sony NP-FZ100 Rechargeable Lithium-Ion Battery (2280mAh), you will still be able to shoot thousands of shots before swapping batteries.

In this guide I’ll be taking a look at both the official and third party battery options for the Sony A1, along with battery chargers and battery grips.

Batteries

The official battery for the Sony a1 is the Sony NP-FZ100 Rechargeable Lithium-Ion Battery (2280mAh). You will have received one of these with your camera (if purchased new).

I’d very strongly recommend that you stick to the official Sony batteries. Yes you can save a few dollars by purchasing a third-party battery, but this is a huge risk with a $6,500.00 camera!

Many third-party NP-FZ100 batteries will also throw up a warning when used in the a1, and will also fail to display the battery percentage remaining. Batteries that don’t throw warnings today can start throwing warnings tomorrow when Sony releases firmware updates for the a1.

So although I will mention a couple of third-party battery options, I don’t recommend that you purchase them!

Sony NP-FZ100

The official battery for the Sony a1 is the Sony NP-FZ100 Rechargeable Lithium-Ion Battery (2280mAh). You will have received one of these with your camera (if purchased new).

RAVPower NP-FZ100

If you don’t wish to listen to my advice and insist on using a third-party battery, then the RAVPower NP-FZ100 are one of the better options and includes a dual USB charger.

Watson NP-FZ100

One other third-party option is the Watson NP-FZ100. Again, these batteries can throw warnings. Often the batteries will be updated to work with the a1, then along comes a firmware update and errors are thrown again.

Battery Chargers

When it comes to charging the battery for the Sony a1 there are a few options for you to consider.

Sony BC-QZ1

The official battery charger for the NP-FZ100 battery is the Sony BC-QZ1. One of these chargers will be included in the box with your a1. With this charger you can charge an official NP-FZ100 battery in around two hours.

Sony BC-ZD1 Dual Battery Charger

The BC-ZD1 is a high-speed charger for Sony’s NP-FZ100 batteries. It can simultaneously charge two batteries in approximately 155 minutes when connected to a USB Power Delivery (PD) compatible power supply with 30W or higher output and a USB cable with USB PD support (3A) or higher current.

• Charges two NP-FZ100 batteries simultaneously in approximately 155 minutes when connected to a USB PD compatible power supply
• Equipped with an indicator lamp that shows the battery charging status in 5 stages
• Width approx. 84.5 mm x Height approx. 29.2 mm x Depth approx. 70.0 mm, weight approx. 149g
• With heat dissipation measures plus built-in heat monitoring and control

Sony NPA-MQZ1K

The Sony NPA-MQZ1K multi battery kit is most useful if you shoot a lot of video with your Alpha 1. It can charge 4x NP-FZ100 batteries in approximately 480 minutes. It also lets you power two USB devices as well as the camera at the same time. The NPA-MQZ1K comes with two NP-FZ100 batteries, a cable protector and a mounting plate. 

Watson Mini Duo Charger

If you are after a low cost dual charger then the Watson mini duo charger is one of the better options. It’s a USB charger so isn’t the fastest, but will still charge two NP-FZ100 batteries in around 5 hours. So more of a charger to leave on overnight than for a quick charge during the day.

Battery Grip

The official battery grip for the Sony a1 is the Sony VG-C4EM battery grip. This is also the same battery grip used by the Sony a7R IV, Sony a7S III, Sony a1 and the Sony a7 IV.

Sony VG-C4EM

The Sony VG-C4EM grip is the perfect match for the Sony a1 since it shares the same material and button feel. Using the joystick or shutter button on this grip feels no different to the one on the Sony a1’s body.

The grip holds 2x NP-FZ100 batteries so effectively doubles the battery life of the a1.

On top of the grip is a vertical shutter button to make shooting vertically a lot more comfortable, and a lock switch to prevent accidental use when using the camera’s shutter button. There are also C1 and C2 custom buttons and a shutter dial on the front.

On the rear you’ll find a joystick, an AF-On button, aperture dial and AEL button.

To attach the grip you need to remove the battery door from the a1. This is easy thanks to a little switch inside the door. This can then be safely stored inside the battery grip itself. You then insert the column into the battery compartment and tighten the fitting screw.

I own this grip myself and although it’s expensive I do prefer it to the cheaper Meike third-party grip that I also own. It matches perfectly with the camera body so if consistency is important to you then this is the battery grip to go for.

Vello BG-S7 Battery Grip

The Sony VG-C4EM grip is not the cheapest, so if you are on a budget then you might want to consider the Vello BG-S7 grip instead. Although if you are on a budget you probably won’t be shooting with the über expensive Sony a1 in the first place!

The Vello grip is very similar to the Sony grip. It includes a dual battery tray that accepts two NP-FZ100 rechargeable batteries, doubling the camera’s battery life and shooting time.

There’s an extended, rubberized, nonslip grip, and an alternate shutter release button for vertical use. It also incorporates a secondary control set with front and rear dials, C1 and C2 function buttons, AF-ON and AEL buttons, and a Multi-Selector Joystick, so full camera functions are maintained while shooting vertically.

The main disadvantage to using this grip over the Sony is that you lose the consistency in terms of how the grip looks and feels on the a1 body. It’s not made out of the same material and the buttons don’t have the same tactile response as those on the Sony grip. If you don’t mind this then it’s definitely a viable alternative.

USB Charging

The Sony a1 can also be charged via its USB Type C Port. You can also use a Power Delivery (PD) certified power bank compatible with an output of 9V/3A to power the a1 for longer shoots.

ANKER 10,000mAh PowerCore Slim PD

One such charger is the Anker PowerCore Slim PD. I use this myself and it will comfortable charge the Sony NP-FZ100 battery in camera two times before it needs recharging itself.

Continuous Power

If you need to provide power for longer shoots then here are your options.

Sony DC-C1 DC Coupler

The DC-C1 DC coupler allows for a stable power supply during long shoots or streaming by providing continuous, reliable power to cameras compatible with NP-FZ100 or NP-FW50 rechargeable battery packs using an external power source such as a USB PD (65 W or more) compatible AC adapter and USB cable with USB PD support (5 A).

• Supplies power directly from an external power source such as a USB PD compatible AC adapter (65 W or more) to a camera body that supports NP-FZ100 or NP-FW50 batteries
• To prevent accidental cable disconnection, the DC-C1 is equipped with the locking screw hole, or an anchor loop can be used to secure the cable to the USB port ​
• 1.6m cable connects plug-in plate to the power supply assembly for flexible setup during shooting
• Equipped with Power Indicator Lamp that shows the power supply status
• Width approx. 52.0 mm x Height approx. 70.6 mm x Depth approx. 32.0 mm

FAQs