Sony A9 Auto ISO stuck on 100

[Jonathan Hanson]

I didn't see this issue in any previous threads I could find. The auto ISO on my A9 is stuck on 100. I can set ISO to any value manually but as soon as I choose auto it reverts to 100. Has anyone had this issue, and could it be operator error? Always willing to consider the latter!

Thanks,

Jonathan

 

[iamdlewis]

Is your range limiter just set to 100 for top and bottom?

 

[Raz]

Check:

1. Menu
2. Tab 1 (red)
3. Exposure 1 (page 9/14)
4. ISO Settings
5. ISO Range Limit

 

[Jonathan Hanson]

Check:

1. Menu
2. Tab 1 (red)
3. Exposure 1 (page 9/14)
4. ISO Settings
5. ISO Range Limit

Thanks for the replies. The auto ISO range setting is on full, from 50 to 12,800. The "Auto Minimum SS" is set to Standard. I'm thinking this might be a repair issue.

 

[Tim Mayo]

How were you testing this? If you were using one of the modes such as aperture or shutter priority the camera might be achieving the correct exposure with ISO 100 by dropping the shutter speed or opening the aperture. If you set it to manual (M) then increase the shutter speed you should see the ISO increase at some point unless it has been limited. Is this a recent issue and it was previously working fine? Or is it a new camera purchase? A camera reset to factory defaults might help as a last resort.